Stacking non-linear layers allows deep neural networks to model complicated functions, and including residual connections in Transformer layers is beneficial for convergence and performance. However, residual connections may make the model “forget” distant layers and fail to fuse information from previous layers effectively. Selectively managing the representation aggregation of Transformer layers may lead to better performance. In this paper, we present a Transformer with depth-wise LSTMs connecting cascading Transformer layers and sub-layers. We show that layer normalization and feed-forward computation within a Transformer layer can be absorbed into depth-wise LSTMs connecting pure Transformer attention layers. Our experiments with the 6-layer Transformer show significant BLEU improvements in both WMT 14 English-German / French tasks and the OPUS-100 many-to-many multilingual NMT task, and our deep Transformer experiments demonstrate the effectiveness of depth-wise LSTM on the convergence and performance of deep Transformers.

One of the reasons Transformer translation models are popular is that self-attention networks for context modelling can be easily parallelized at sequence level. However, the computational complexity of a self-attention network is O(n²), increasing quadratically with sequence length. By contrast, the complexity of LSTM-based approaches is only O(n). In practice, however, LSTMs are much slower to train than self-attention networks as they cannot be parallelized at sequence level: to model context, the current LSTM state relies on the full LSTM computation of the preceding state. This has to be computed n times for a sequence of length n. The linear transformations involved in the LSTM gate and state computations are the major cost factors in this. To enable sequence-level parallelization of LSTMs, we approximate full LSTM context modelling by computing hidden states and gates with the current input and a simple bag-of-words representation of the preceding tokens context. This allows us to compute each input step efficiently in parallel, avoiding the formerly costly sequential linear transformations. We then connect the outputs of each parallel step with computationally cheap element-wise computations. We call this the Highly Parallelized LSTM. To further constrain the number of LSTM parameters, we compute several small HPLSTMs in parallel like multi-head attention in the Transformer. The experiments show that our MHPLSTM decoder achieves significant BLEU improvements, while being even slightly faster than the self-attention network in training, and much faster than the standard LSTM.

Neural machine translation has achieved great success in bilingual settings, as well as in multilingual settings. With the increase of the number of languages, multilingual systems tend to underperform their bilingual counterparts. Model capacity has been found crucial for massively multilingual NMT to support language pairs with varying typological characteristics. Previous work increases the modeling capacity by deepening or widening the Transformer. However, modeling cardinality based on aggregating a set of transformations with the same topology has been proven more effective than going deeper or wider when increasing capacity. In this paper, we propose to efficiently increase the capacity for multilingual NMT by increasing the cardinality. Unlike previous work which feeds the same input to several transformations and merges their outputs into one, we present a Multi-Input-Multi-Output (MIMO) architecture that allows each transformation of the block to have its own input. We also present a task-aware attention mechanism to learn to selectively utilize individual transformations from a set of transformations for different translation directions. Our model surpasses previous work and establishes a new state-of-the-art on the large scale OPUS-100 corpus while being 1.31 times as fast.

The Transformer translation model is based on the multi-head attention mechanism, which can be parallelized easily. The multi-head attention network performs the scaled dot-product attention function in parallel, empowering the model by jointly attending to information from different representation subspaces at different positions. In this paper, we present an approach to learning a hard retrieval attention where an attention head only attends to one token in the sentence rather than all tokens. The matrix multiplication between attention probabilities and the value sequence in the standard scaled dot-product attention can thus be replaced by a simple and efficient retrieval operation. We show that our hard retrieval attention mechanism is 1.43 times faster in decoding, while preserving translation quality on a wide range of machine translation tasks when used in the decoder self- and cross-attention networks.

Due to its effectiveness and performance, the Transformer translation model has attracted wide attention, most recently in terms of probing-based approaches. Previous work focuses on using or probing source linguistic features in the encoder. To date, the way word translation evolves in Transformer layers has not yet been investigated. Naively, one might assume that encoder layers capture source information while decoder layers translate. In this work, we show that this is not quite the case: translation already happens progressively in encoder layers and even in the input embeddings. More surprisingly, we find that some of the lower decoder layers do not actually do that much decoding. We show all of this in terms of a probing approach where we project representations of the layer analyzed to the final trained and frozen classifier level of the Transformer decoder to measure word translation accuracy. Our findings motivate and explain a Transformer configuration change: if translation already happens in the encoder layers, perhaps we can increase the number of encoder layers, while decreasing the number of decoder layers, boosting decoding speed, without loss in translation quality? Our experiments show that this is indeed the case: we can increase speed by up to a factor 2.3 with small gains in translation quality, while an 18-4 deep encoder configuration boosts translation quality by +1.42 BLEU (En-De) at a speed-up of 1.4.

The Transformer translation model (Vaswani et al., 2017) based on a multi-head attention mechanism can be computed effectively in parallel and has significantly pushed forward the performance of Neural Machine Translation (NMT). Though intuitively the attentional network can connect distant words via shorter network paths than RNNs, empirical analysis demonstrates that it still has difficulty in fully capturing long-distance dependencies (Tang et al., 2018). Considering that modeling phrases instead of words has significantly improved the Statistical Machine Translation (SMT) approach through the use of larger translation blocks (“phrases”) and its reordering ability, modeling NMT at phrase level is an intuitive proposal to help the model capture long-distance relationships. In this paper, we first propose an attentive phrase representation generation mechanism which is able to generate phrase representations from corresponding token representations. In addition, we incorporate the generated phrase representations into the Transformer translation model to enhance its ability to capture long-distance relationships. In our experiments, we obtain significant improvements on the WMT 14 English-German and English-French tasks on top of the strong Transformer baseline, which shows the effectiveness of our approach. Our approach helps Transformer Base models perform at the level of Transformer Big models, and even significantly better for long sentences, but with substantially fewer parameters and training steps. The fact that phrase representations help even in the big setting further supports our conjecture that they make a valuable contribution to long-distance relations.

The Transformer translation model employs residual connection and layer normalization to ease the optimization difficulties caused by its multi-layer encoder/decoder structure. Previous research shows that even with residual connection and layer normalization, deep Transformers still have difficulty in training, and particularly Transformer models with more than 12 encoder/decoder layers fail to converge. In this paper, we first empirically demonstrate that a simple modification made in the official implementation, which changes the computation order of residual connection and layer normalization, can significantly ease the optimization of deep Transformers. We then compare the subtle differences in computation order in considerable detail, and present a parameter initialization method that leverages the Lipschitz constraint on the initialization of Transformer parameters that effectively ensures training convergence. In contrast to findings in previous research we further demonstrate that with Lipschitz parameter initialization, deep Transformers with the original computation order can converge, and obtain significant BLEU improvements with up to 24 layers. In contrast to previous research which focuses on deep encoders, our approach additionally enables Transformers to also benefit from deep decoders.

The choice of hyper-parameters affects the performance of neural models. While much previous research (Sutskever et al., 2013; Duchi et al., 2011; Kingma and Ba, 2015) focuses on accelerating convergence and reducing the effects of the learning rate, comparatively few papers concentrate on the effect of batch size. In this paper, we analyze how increasing batch size affects gradient direction, and propose to evaluate the stability of gradients with their angle change. Based on our observations, the angle change of gradient direction first tends to stabilize (i.e. gradually decrease) while accumulating mini-batches, and then starts to fluctuate. We propose to automatically and dynamically determine batch sizes by accumulating gradients of mini-batches and performing an optimization step at just the time when the direction of gradients starts to fluctuate. To improve the efficiency of our approach for large models, we propose a sampling approach to select gradients of parameters sensitive to the batch size. Our approach dynamically determines proper and efficient batch sizes during training. In our experiments on the WMT 14 English to German and English to French tasks, our approach improves the Transformer with a fixed 25k batch size by +0.73 and +0.82 BLEU respectively.

In this paper, we describe our submission to the English-German APE shared task at WMT 2019. We utilize and adapt an NMT architecture originally developed for exploiting context information to APE, implement this in our own transformer model and explore joint training of the APE task with a de-noising encoder.