Traditionally, success in multilingual machine translation can be attributed to three key factors in training data: large volume, diverse translation directions, and high quality. In the current practice of fine-tuning large language models (LLMs) for translation, we revisit the importance of these factors. We find that LLMs display strong translation capability after being fine-tuned on as few as 32 parallel sentences and that fine-tuning on a single translation direction enables translation in multiple directions. However, the choice of direction is critical: fine-tuning LLMs with only English on the target side can lead to task misinterpretation, which hinders translation into non-English languages. Problems also arise when noisy synthetic data is placed on the target side, especially when the target language is well-represented in LLM pre-training. Yet interestingly, synthesized data in an under-represented language has a less pronounced effect. Our findings suggest that when adapting LLMs to translation, the requirement on data quantity can be eased but careful considerations are still crucial to prevent an LLM from exploiting unintended data biases.

Multilingual large language models are designed, claimed, and expected to cater to speakers of varied languages. We hypothesise that the current practices of fine-tuning and evaluating these models may not perfectly align with this objective owing to a heavy reliance on translation, which cannot cover language-specific knowledge but can introduce translation defects. It remains unknown whether the nature of the instruction data has an impact on the model output; conversely, it is questionable whether translated test sets can capture such nuances. Due to the often coupled practices of using translated data in both stages, such imperfections could have been overlooked. This work investigates these issues using controlled native or translated data during the instruction tuning and evaluation stages. We show that native or generation benchmarks reveal a notable difference between native and translated instruction data especially when model performance is high, whereas other types of test sets cannot. The comparison between round-trip and single-pass translations reflects the importance of knowledge from language-native resources. Finally, we demonstrate that regularization is beneficial to bridging this gap on structured but not generative tasks.

Deploying large language models (LLMs) encounters challenges due to intensive computational and memory requirements. Our research examines vocabulary trimming (VT) inspired by restricting embedding entries to the language of interest to bolster time and memory efficiency. While such modifications have been proven effective in tasks like machine translation, tailoring them to LLMs demands specific modifications given the diverse nature of LLM applications. We apply two language heuristics to trim the full vocabulary—Unicode-based script filtering and corpus-based selection—to different LLM families and sizes. The methods are straightforward, interpretable, and easy to implement. It is found that VT reduces the memory usage of small models by nearly 50% and has an upper bound of 25% improvement in generation speed. Yet, we reveal the limitations of these methods in that they do not perform consistently well for each language with diminishing returns in larger models.

Foundational large language models (LLMs) can be instruction-tuned to perform open-domain question answering, facilitating applications like chat assistants. While such efforts are often carried out in a single language, we empirically analyze cost-efficient strategies for multilingual scenarios. Our study employs the Alpaca dataset and machine translations of it to form multilingual data, which is then used to tune LLMs through either low-rank adaptation or full-parameter training. Under a controlled computation budget, comparisons show that multilingual tuning is on par or better than tuning a model for each language. Furthermore, multilingual tuning with downsampled data can be as powerful and more robust. Our findings serve as a guide for expanding language support through instruction tuning.

We propose iteratively prompting a large language model to self-correct a translation, with inspiration from their strong language capability as well as a human-like translation approach. Interestingly, multi-turn querying reduces the output’s string-based metric scores, but neural metrics suggest comparable or improved quality after two or more iterations. Human evaluations indicate better fluency and naturalness compared to initial translations and even human references, all while maintaining quality. Ablation studies underscore the importance of anchoring the refinement to the source and a reasonable seed translation for quality considerations. We also discuss the challenges in evaluation and relation to human performance and translationese.

The High Performance Language Technologies (HPLT) project is a 3-year EU-funded project that started in September 2022. It aims to deliver free, sustainable, and reusable datasets, models, and workflows at scale using high-performance computing. We describe the first results of the project. The data release includes monolingual data in 75 languages at 5.6T tokens and parallel data in 18 language pairs at 96M pairs, derived from 1.8 petabytes of web crawls. Building upon automated and transparent pipelines, the first machine translation (MT) models as well as large language models (LLMs) have been trained and released. Multiple data processing tools and pipelines have also been made public.

This paper describes the University of Edinburgh’s submission to the AmericasNLP 2024 shared task on the translation of Spanish into 11 indigenous American languages. We explore the ability of multilingual Large Language Models (LLMs) to model low-resource languages by continued pre-training with LoRA, and conduct instruction fine-tuning using a variety of datasets, demonstrating that this improves LLM performance. Furthermore, we demonstrate the efficacy of checkpoint averaging alongside decoding techniques like beam search and sampling, resulting in further improvements. We participate in all 11 translation directions.

Several recent papers have investigated the potential of language models as knowledge bases as well as the existence of severe biases when extracting factual knowledge. In this work, we focus on the factual probing performance over unseen prompts from tuning, and using a probabilistic view we show the inherent misalignment between pre-training and downstream tuning objectives in language models for probing knowledge. We hypothesize that simultaneously debiasing these objectives can be the key to generalisation over unseen prompts. We propose an adapter-based framework, **UniArk**, for generalised and consistent factual knowledge extraction through simple methods without introducing extra parameters. Extensive experiments show that UniArk can significantly improve the model’s out-of-domain generalisation as well as consistency under various prompts. Additionally, we construct **ParaTrex**, a large-scale and diverse dataset for measuring the inconsistency and out-of-domain generation of models. Further, ParaTrex offers a reference method for constructing paraphrased datasets using large language models.

The COMET metric has blazed a trail in the machine translation community, given its strong correlation with human judgements of translation quality.Its success stems from being a modified pre-trained multilingual model finetuned for quality assessment.However, it being a machine learning model also gives rise to a new set of pitfalls that may not be widely known. We investigate these unexpected behaviours from three aspects:1) technical: obsolete software versions and compute precision; 2) data: empty content, language mismatch, and translationese at test time as well as distribution and domain biases in training; 3) usage and reporting: multi-reference support and model referencing in the literature. All of these problems imply that COMET scores are not comparable between papers or even technical setups and we put forward our perspective on fixing each issue.Furthermore, we release the sacreCOMET package that can generate a signature for the software and model configuration as well as an appropriate citation.The goal of this work is to help the community make more sound use of the COMET metric.

Despite the recent popularity of Large Language Models (LLMs) in Machine Translation (MT), their performance in low-resource languages (LRLs) still lags significantly behind Neural Machine Translation (NMT) models. In this work, we explore what it would take to adapt LLMs for the low-resource setting. Particularly, we re-examine the role of two factors: a) the importance and application of parallel data, and b) diversity in Supervised Fine-Tuning (SFT). Recently, parallel data has seen reduced use in adapting LLMs for MT, while data diversity has been embraced to promote transfer across languages and tasks. However, for low-resource LLM-MT, we show that the opposite is true for both considerations: a) parallel data is critical during both pre-training and SFT; b) diversity tends to cause interference instead of transfer. Our experiments with three LLMs across two low-resourced language groups—Indigenous American and North-East Indian—reveal consistent trends, underscoring the generalizability of our findings. We believe these insights will be valuable for scaling to massively multilingual LLM-MT models that can effectively serve LRLs.

We present Team Cher’s submission to the ArabicNLP 2024 KSAA-CAD shared task on the reverse dictionary for Arabic—the retrieval of words using definitions as a query. Our approach is based on a multi-task learning framework that jointly learns reverse dictionary, definition generation, and reconstruction tasks. This work explores different tokenization strategies and compares retrieval performance for each embedding architecture. Evaluation using the KSAA-CAD benchmark demonstrates the effectiveness of our multi-task approach and provides insights into the reverse dictionary task for Arabic. It is worth highlighting that we achieve strong performance without using any external resources in addition to the provided training data.

Current approaches to question answering rely on pre-trained language models (PLMs) like RoBERTa. This work challenges the existing question-answer encoding convention and explores finer representations. We begin with testing various pooling methods compared to using the begin-of-sentence token as a question representation for better quality. Next, we explore opportunities to simultaneously embed all answer candidates with the question. This enables cross-reference between answer choices and improves inference throughput via reduced memory usage. Despite their simplicity and effectiveness, these methods have yet to be widely studied in current frameworks. We experiment with different PLMs, and with and without the integration of knowledge graphs. Results prove that the memory efficacy of the proposed techniques with little sacrifice in performance. Practically, our work enhances 38-100% throughput with 26-65% speedups on consumer-grade GPUs by allowing for considerably larger batch sizes. Our work sends a message to the community with promising directions in both representation quality and efficiency for the question-answering task in natural language processing.

Advances in natural language processing, such as transfer learning from pre-trained language models, have impacted how models are trained for programming language tasks too. Previous research primarily explored code pre-training and expanded it through multi-modality and multi-tasking, yet the data for downstream tasks remain modest in size. Focusing on data utilization for downstream tasks, we propose and adapt augmentation methods that yield consistent improvements in code translation and summarization by up to 6.9% and 7.5% respectively. Further analysis suggests that our methods work orthogonally and show benefits in output code style and numeric consistency. We also discuss test data imperfections.

This paper introduces PMIndiaSum, a multilingual and massively parallel summarization corpus focused on languages in India. Our corpus provides a training and testing ground for four language families, 14 languages, and the largest to date with 196 language pairs. We detail our construction workflow including data acquisition, processing, and quality assurance. Furthermore, we publish benchmarks for monolingual, cross-lingual, and multilingual summarization by fine-tuning, prompting, as well as translate-and-summarize. Experimental results confirm the crucial role of our data in aiding summarization between Indian languages. Our dataset is publicly available and can be freely modified and re-distributed.

Resolving semantic ambiguity has long been recognised as a central challenge in the field of Machine Translation. Recent work on benchmarking translation performance on ambiguous sentences has exposed the limitations of conventional Neural Machine Translation (NMT) systems, which fail to handle many such cases. Large language models (LLMs) have emerged as a promising alternative, demonstrating comparable performance to traditional NMT models while introducing new paradigms for controlling the target outputs. In this paper, we study the capabilities of LLMs to translate “ambiguous sentences” - i.e. those containing highly polysemous words and/or rare word senses. We also propose two ways to improve their disambiguation capabilities, through a) in-context learning and b) fine-tuning on carefully curated ambiguous datasets. Experiments show that our methods can match or outperform state-of-the-art systems such as DeepL and NLLB in four out of five language directions. Our research provides valuable insights into effectively adapting LLMs to become better disambiguators during Machine Translation. We release our curated disambiguation corpora and resources at https://data.statmt.org/ambiguous-europarl.

Terminology correctness is important in the downstream application of machine translation, and a prevalent way to ensure this is to inject terminology constraints into a translation system. In our submission to the WMT 2023 terminology translation task, we adopt a translate-then-refine approach which can be domain-independent and requires minimal manual efforts. We annotate random source words with pseudo-terminology translations obtained from word alignment to first train a terminology-aware model. Further, we explore two post-processing methods. First, we use an alignment process to discover whether a terminology constraint has been violated, and if so, we re-decode with the violating word negatively constrained. Alternatively, we leverage a large language model to refine a hypothesis by providing it with terminology constraints. Results show that our terminology-aware model learns to incorporate terminologies effectively, and the large language model refinement process can further improve terminology recall.

We build a dual-way neural dictionary to retrieve words given definitions, and produce definitions for queried words. The model learns the two tasks simultaneously and handles unknown words via embeddings. It casts a word or a definition to the same representation space through a shared layer, then generates the other form in a multi-task fashion. Our method achieves promising automatic scores on previous benchmarks without extra resources. Human annotators prefer the model’s outputs in both reference-less and reference-based evaluation, indicating its practicality. Analysis suggests that multiple objectives benefit learning.

“Recent advances in the field of abstractive summarization leverage pre-trained language models rather than train a model from scratch. However, such models are sluggish to train and accompanied by a massive overhead. Researchers have proposed a few lightweight alternatives such as smaller adapters to mitigate the drawbacks. Nonetheless, it remains uncertain whether using adapters benefits the task of summarization, in terms of improved efficiency without an unpleasant sacrifice in performance. In this work, we carry out multifaceted investigations on fine-tuning and adapters for summarization tasks with varying complexity: language, domain, and task transfer. In our experiments, fine-tuning a pre-trained language model generally attains a better performance than using adapters; the performance gap positively correlates with the amount of training data used. Notably, adapters exceed fine-tuning under extremely low-resource conditions. We further provide insights on multilinguality, model convergence, and robustness, hoping to shed light on the pragmatic choice of fine-tuning or adapters in abstractive summarization.”

This paper presents a winning submission to the SemEval 2022 Task 1 on two sub-tasks: reverse dictionary and definition modelling. We leverage a recently proposed unified model with multi-task training. It utilizes data symmetrically and learns to tackle both tracks concurrently. Analysis shows that our system performs consistently on diverse languages, and works the best with sgns embeddings. Yet, char and electra carry intriguing properties. The two tracks’ best results are always in differing subsets grouped by linguistic annotations. In this task, the quality of definition generation lags behind, and BLEU scores might be misleading.

The University of Edinburgh participated in the WMT22 shared task on code-mixed translation. This consists of two subtasks: i) generating code-mixed Hindi/English (Hinglish) text generation from parallel Hindi and English sentences and ii) machine translation from Hinglish to English. As both subtasks are considered low-resource, we focused our efforts on careful data generation and curation, especially the use of backtranslation from monolingual resources. For subtask 1 we explored the effects of constrained decoding on English and transliterated subwords in order to produce Hinglish. For subtask 2, we investigated different pretraining techniques, namely comparing simple initialisation from existing machine translation models and aligned augmentation. For both subtasks, we found that our baseline systems worked best. Our systems for both subtasks were one of the overall top-performing submissions.

Machine translation systems are vulnerable to domain mismatch, especially in a low-resource scenario. Out-of-domain translations are often of poor quality and prone to hallucinations, due to exposure bias and the decoder acting as a language model. We adopt two approaches to alleviate this problem: lexical shortlisting restricted by IBM statistical alignments, and hypothesis reranking based on similarity. The methods are computationally cheap and show success on low-resource out-of-domain test sets. However, the methods lose advantage when there is sufficient data or too great domain mismatch. This is due to both the IBM model losing its advantage over the implicitly learned neural alignment, and issues with subword segmentation of unseen words.

This paper presents the University of Edinburgh’s constrained submissions of English-German and English-Hausa systems to the WMT 2021 shared task on news translation. We build En-De systems in three stages: corpus filtering, back-translation, and fine-tuning. For En-Ha we use an iterative back-translation approach on top of pre-trained En-De models and investigate vocabulary embedding mapping.

We describe the University of Edinburgh’s Bengali↔Hindi constrained systems submitted to the WMT21 News Translation task. We submitted ensembles of Transformer models built with large-scale back-translation and fine-tuned on subsets of training data retrieved based on similarity to the target domain.

We participated in all tracks of the WMT 2021 efficient machine translation task: single-core CPU, multi-core CPU, and GPU hardware with throughput and latency conditions. Our submissions combine several efficiency strategies: knowledge distillation, a simpler simple recurrent unit (SSRU) decoder with one or two layers, lexical shortlists, smaller numerical formats, and pruning. For the CPU track, we used quantized 8-bit models. For the GPU track, we experimented with FP16 and 8-bit integers in tensorcores. Some of our submissions optimize for size via 4-bit log quantization and omitting a lexical shortlist. We have extended pruning to more parts of the network, emphasizing component- and block-level pruning that actually improves speed unlike coefficient-wise pruning.

We present a novel method to extract parallel sentences from two monolingual corpora, using neural machine translation. Our method relies on translating sentences in one corpus, but constraining the decoding by a prefix tree built on the other corpus. We argue that a neural machine translation system by itself can be a sentence similarity scorer and it efficiently approximates pairwise comparison with a modified beam search. When benchmarked on the BUCC shared task, our method achieves results comparable to other submissions.

We report on methods to create the largest publicly available parallel corpora by crawling the web, using open source software. We empirically compare alternative methods and publish benchmark data sets for sentence alignment and sentence pair filtering. We also describe the parallel corpora released and evaluate their quality and their usefulness to create machine translation systems.

This paper describes the University of Edinburgh’s neural machine translation systems submitted to the IWSLT 2020 open domain Japanese↔Chinese translation task. On top of commonplace techniques like tokenisation and corpus cleaning, we explore character mapping and unsupervised decoding-time adaptation. Our techniques focus on leveraging the provided data, and we show the positive impact of each technique through the gradual improvement of BLEU.